Skip to content
BUILT AROUND YOUR COCKPIT

THE RIGHT CONNECTION.

Compatibility is being evaluated. GEKTRA is designed to integrate with SimHub for real-time telemetry-driven wind simulation.

SIMHUB COMPATIBILITY

PCPLAYSTATIONXBOX

Powered by SimHub Telemetry

Console compatibility is available on supported telemetry-enabled games. A Windows PC running SimHub is required.

BUILT FOR PC. READY FOR CONSOLE.

GEKTRA integrates with SimHub to transform live racing telemetry into dynamic airflow, adding another layer of physical immersion to your simulator.

CHECK YOUR GAME

Full SimHub integration

SimHubPC
  • iRacingPC
  • Assetto CorsaPC
  • Assetto Corsa CompetizionePC
  • Assetto Corsa EVOPC
  • Automobilista 2PC
  • Le Mans UltimatePC
  • rFactor 2PC
  • RaceRoomPC
  • BeamNG.drivePC
  • F1 SeriesPC
  • Supported Forza titlesPC
  • …and many more SimHub-supported titles

PC offers the widest range of SimHub-compatible racing titles.

HOW CONSOLE SUPPORT WORKS

The console sends game telemetry over the local network to SimHub. SimHub then controls the GEKTRA system in real time.

  1. PLAYSTATION / XBOX
  2. Local Network
  3. Windows PC running SimHubSimHub
  4. GEKTRA ControllerUSB
  5. GEKTRA Wind System

No direct USB connection between GEKTRA and the console is required.

CONSOLE SETUP GUIDES

SUPPORTED ON COMPATIBLE TITLES

F1 SERIES — PLAYSTATION

F1 titles use configurable UDP telemetry. The game sends telemetry directly to the IP address of the Windows PC running SimHub.

  1. PlayStation
  2. Local Network
  3. Windows PC / SimHub
  4. GEKTRA
  • PLAYSTATION
  • F1
  • SIMHUB
  • UDP Telemetry
  • GEKTRA
F1 PlayStation Setup
  1. Connect the PlayStation and Windows PC to the same network.
  2. Find the local IPv4 address of the PC running SimHub.
  3. Open the F1 game.
  4. Go to the game’s Telemetry Settings.
  5. Set UDP Telemetry to ON.
  6. Set UDP IP Address to the IP address of the SimHub PC.
  7. Set the telemetry UDP port according to the game configuration. For supported F1 titles, the commonly used default is 20777.
  8. Select the corresponding F1 title inside SimHub.
  9. Start driving and verify that SimHub receives telemetry.
UDP IP Address
192.168.1.50
UDP Port
20777

Exact telemetry settings may vary between F1 game versions.

SUPPORTED ON COMPATIBLE TITLES

F1 SERIES — XBOX

The configuration is similar to PlayStation: the game sends UDP telemetry to the Windows PC running SimHub.

  1. Xbox
  2. Local Network
  3. Windows PC / SimHub
  4. GEKTRA
  • XBOX
  • F1
  • SIMHUB
  • UDP Telemetry
  • GEKTRA
F1 Xbox Setup
  1. Connect Xbox and the SimHub PC to the same network.
  2. Find the IPv4 address of the Windows PC.
  3. Open the F1 telemetry settings.
  4. Enable UDP telemetry.
  5. Enter the Windows PC IP address.
  6. Use the UDP port required by the specific F1 title.
  7. Select the corresponding F1 game in SimHub.
  8. Start driving and verify telemetry reception.
SimHub PC IP
192.168.1.50
UDP Port
20777

Telemetry format and UDP options may vary between F1 versions.

COMPATIBILITY VARIES BY TITLE

FORZA — XBOX

Some Forza titles can send Data Out telemetry over the local network to a Windows PC running SimHub.

  1. Xbox
  2. Local Network
  3. Windows PC / SimHub
  4. GEKTRA
  • XBOX
  • FORZA
  • SIMHUB
  • UDP Telemetry
  • GEKTRA

Forza console compatibility varies by game and Xbox model.

Check compatibility for your specific game before purchase.

Example setup
  1. Connect the Xbox and SimHub PC to the same network.
  2. Find the IPv4 address of the SimHub PC.
  3. Open the supported Forza title.
  4. Find the Data Out / Telemetry settings.
  5. Enable Data Out.
  6. Set the Data Out IP Address to the Windows PC IP address.
  7. Configure the required telemetry port.
  8. Select the appropriate Forza profile in SimHub.
Data Out IP
192.168.1.50

RECOMMENDED NETWORK SETUP

For the most stable console telemetry connection:

  1. Console
  2. Ethernet
  3. Router / Network Switch
  1. Windows PC
  2. Ethernet
  3. Router / Network Switch

Wi-Fi can also work, but wired Ethernet is recommended for maximum stability and minimum latency.

Optional

DEDICATED GEKTRA CONTROL PC

Console users can run SimHub on a compact Windows mini PC permanently installed in the simulator rig.

  • No gaming PC required for the console itself
  • Dedicated SimHub operation
  • Compact installation
  • Automatic startup possible
  • Keeps the cockpit clean
  • Can remain permanently connected to GEKTRA

The Windows PC is used only to receive telemetry and control GEKTRA. The game itself continues to run on the PlayStation or Xbox.

Not required if you already own a Windows PC capable of running SimHub.

Simulators

Under evaluation

Individual simulator support will be listed once tested and confirmed.

PC

Under evaluation

Operating system and hardware requirements are to be confirmed.

Software

SimHub Compatible

GEKTRA is designed to integrate with SimHub for real-time telemetry-driven wind simulation.

Cockpit / Rig mounting

Under evaluation

Mounting dimensions and profile compatibility will be published after validation.

SOFTWARE / TELEMETRY

POWERED BY SIMHUB

GEKTRA integrates with SimHub to deliver real-time telemetry-driven wind simulation.

DOWNLOAD SIMHUB(opens the official SimHub website in a new tab)

SimHub is third-party software and is not included with GEKTRA. Download it directly from the official SimHub website.

CONSOLE TELEMETRY TROUBLESHOOTING

No telemetry detected?

Check:

  • Console and PC are on the same network
  • Correct game is selected in SimHub
  • Windows Firewall allows SimHub
  • Correct IP address is configured
  • UDP telemetry is enabled where required
  • Correct UDP port is being used
  • The game is actively running in a driving session
  • VPN software is not blocking local network traffic
  • Router client isolation is disabled if applicable

For GT7 specifically: check UDP ports 33739 and 33740.

For supported F1 games: check the game’s configured UDP destination IP and telemetry port.